Description

Suitable for curved beam motorcycles The curved beam electroplating s curved monocular silencer has efficient noise reduction ability. The design of the silencer matches the engine performance of the motorcycle, which assists in the disposal of exhaust emissions to a certain extent and reduces the emission of harmful gases. There are also regulatory requirements for the exhaust emission processing capacity of the silencer. The catalytic conversion device or other emission control technology inside the silencer needs to meet certain standards to ensure that the exhaust emissions of motorcycles meet environmental protection requirements. It has high strength and stability, can withstand various vibrations and impacts during motorcycle driving, and is not easy to damage. Electroplating not only makes the surface of the silencer have a bright visual effect, but also reflects light like a mirror, and improves the texture and grade of the silencer. The shape of the S bend can increase the lines of the silencer. The smoothness and dynamism echo the overall shape of the motorcycle. The beauty of the whole vehicle is improved. The length is 90 cm, the weight is 1.5 kg, the diameter of the cigarette tube rod is 10 cm, and the inner diameter of the small mouth is 3.2 cm. The distance between the installation screw and the small mouth is 55 cm. Note: One piece is not free shipping. The whole piece is packed in the carton.Installation method of exhaust pipe:The first step is to remove the old exhaust pipe.The second step is to remove the old gasket of the interface. The old gasket will be pressed tightly for a long time. It needs to be warped out with a tool to clean up the interface residue.The third step is to change a new gasket, and put the gasket on this side of the exhaust pipe.Fourth, put on the exhaust pipe and screw on it. Don’t tighten the screw.Step 5, after installation, tighten all the screws after the back cover.