Description

Suitable for three-wheel caravan, three-wheel caravan aluminum tires usually use aluminum alloy wheels. The diameter of the tread is 11CM, and the inner diameter of the tire is 27CM，Aluminum alloy has the advantages of light weight, high strength and corrosion resistance. It is capable of reducing the overall weight of the vehicle, improving fuel economy or increasing the range of an electric tricycle. At the same time, the strength of the aluminum alloy is enough to withstand the load of the three-wheeled caravan and various stresses in the driving. Using high-quality rubber materials with good wear resistance, grip and elasticity, the aluminum tires of the three-wheeled caravan have sufficient carrying capacity to support the weight and load of the vehicle. The strength and design of the aluminum wheels ensure that the tires will not be deformed or damaged when carrying heavy loads. At the same time, the rubber part of the tire has good pressure resistance to ensure the stability and safety of the vehicle. The grip performance of the tire will be different on dry, wet or muddy roads. High-end aluminum tires use special rubber formulations and technologies to further improve grip. Aluminum tires need to be durable to reduce the frequency and cost of tire replacement. Aluminum alloy wheels usually have a long service life and are not easy to rust and corrosion. The wear resistance and anti-aging performance of rubber tires will also affect the durability of the tire, and the design of the tire pattern will not only affect the grip, but also affect the appearance of the vehicle. Installation method: Preparation work: Before installing the aluminum tires of the three-wheeled caravan, you need to prepare the required tools and equipment, such as jacks, wrenches, screwdrivers, etc. At the same time, ensure that the vehicle is in a safe state to avoid accidents during the installation process. Remove the old tire: If you are replacing the tire, you need to remove the old tire first. Use a jack to lift the vehicle to get the tire off the ground, then use a wrench to loosen the screws on the tire and remove the old tire from the hub. Install new tires: Install new aluminum tires on the hub. First, the inner tube of the tire is installed on the hub, and then the outer tire is placed on the inner tube. Use a wrench to tighten the screws on the tire to ensure that the tire is securely installed. During the installation process, pay attention to the direction and position of the tire to ensure that the tire pattern and logo are correctly installed. Adjust the air pressure: After the installation is complete, you need to adjust the air pressure of the tire. According to the vehicle instruction manual and tire specifications, use the barometer to adjust the tire pressure to the appropriate value. The correct air pressure can improve the performance and life of the tire, and also ensure the safety of the vehicle. Inspection and commissioning: After the installation is completed, the tire should be inspected and commissioning. Check whether the installation of the tire is firm, whether the air pressure is normal, and whether the tire pattern and logo are correctly installed. At the same time, it is necessary to conduct a test drive to check whether the vehicle’s driving stability and handling performance are good. If the problem is found, it should be adjusted and repaired in time. Note: One piece is not free, please consider the shipping cost when purchasing.