Description

Suitable for curved beam motorcycles. The curved beam electroplated monocular silencer effectively absorbs and weakens the sound wave energy through the internal design of multi-chamber, sound-absorbing materials, etc., to ensure that the noise generated by the motorcycle is within the specified range. The silencer is made of electroplated material, which not only gives the silencer a shiny appearance, but also improves its Corrosion resistance and wear resistance. The curved beam electroplated monocular silencer needs to be perfectly adapted to different models of curved beam motorcycles to ensure that the installation is firm and can work normally under various driving conditions, and there will be no problems such as looseness and air leakage. The length is 93.5 cm, the weight is 1.95 kg, the diameter of the cigarette tube rod is 8.5 cm, and the inner diameter of the small mouth is 3.2 cm. The distance between the installation screw and the small mouth is 41 cm. Note: One piece is not free shipping. The whole piece is packed in a carton of 12 pieces per box.Installation method of exhaust pipe:The first step is to remove the old exhaust pipe.The second step is to remove the old gasket of the interface. The old gasket will be pressed tightly for a long time. It needs to be warped out with a tool to clean up the interface residue.The third step is to change a new gasket, and put the gasket on this side of the exhaust pipe.Fourth, put on the exhaust pipe and screw on it. Don’t tighten the screw.Step 5, after installation, tighten all the screws after the back cover.