Description

Suitable for three-wheeled canopy vehicles. The disc brake disc is an important part of the brake system of three-wheeled canopy vehicles. Through cooperation with the brake caliper, it can provide strong braking force, enabling the vehicle to decelerate or stop in a short time. The disc brake disc is usually designed with heat sinks or ventilation holes, which can effectively dissipate the heat generated during braking, maintain the stable performance of the brake system, and reduce the risk of brake fade. The structure of the disc brake disc is simple, reliable in operation, and not prone to failure. At the same time, the service life of the disc brake disc is long, which can reduce the frequency of maintenance and replacement. In terms of appearance design, it emphasizes simplicity, generosity, and beauty. The surface of the disc brake disc is usually finely processed and treated, presenting a smooth and shiny texture. Be sure to measure the outer diameter, inner diameter, and hole pitch of the previous disc, and check whether the disc is concave or convex. Installation method: Prepare tools and materials: To install the disc brake disc of a three-wheeled canopy vehicle, some basic tools and materials are needed, such as wrenches, screwdrivers, jacks, brake fluid, brake pads, etc. Remove the original brake disc: First, the original brake disc on the three-wheeled canopy vehicle needs to be removed. Use tools such as wrenches and screwdrivers to loosen the screws fixing the brake disc, and then take the brake disc off the wheel. During the removal process, pay attention to protecting the brake oil pipe and other related components to avoid damage. Install the new brake disc: Install the new disc brake disc on the wheel of the three-wheeled canopy vehicle. Align the installation holes of the brake disc with the installation position on the wheel, and then use screws to firmly fix the brake disc. During the installation process, ensure that the position of the brake disc is correct and the tightening force of the screws is moderate to avoid affecting the braking performance. Install the brake caliper: Install the brake caliper on the frame of the three-wheeled canopy vehicle and connect the brake oil pipe to the brake caliper. When installing the brake caliper, ensure that the position of the brake caliper is correct and the connection of the brake oil pipe is firm and there is no leakage. Adjust the brake system: After installation is completed, the brake system of the three-wheeled canopy vehicle needs to be adjusted. First, adjust the position of the brake caliper to make the gap between the brake caliper and the brake disc uniform. Then, adjust the travel of the brake pedal to make the travel of the brake pedal moderate and the braking force uniform. Finally, check the sealing of the brake system to ensure that there is no leakage in the brake system. It should be noted that there may be some differences in the disc brake discs of three-wheeled canopy vehicles in different countries and regions, and the installation methods may also be different. When installing the disc brake disc, it is recommended to refer to the user manual of the three-wheeled canopy vehicle or consult professional vehicle maintenance personnel to ensure correct and safe installation. Note: One item does not include shipping. Please consider the shipping cost when purchasing. the length is 22CM，hole pitch is 7CM.